- RUT950 es un enrutador de alto rendimiento industrial 4G LTE Wi-Fi diseñado como una fuente principal de Internet/Backup y garantiza una conexión a Internet fiable con alto rendimiento y redundancia de datos.

- Compatible con el Sistema de gestión remota (RMS) para el control fácil y seguro.

- Tiene cuatro puertos Ethernet, dos soportes SIM externos, I/O digital, y LEDs indicadores del estado de la señal LTE

- Impulsado por RutOS - un sistema operativo unificado para todos los routers Teltonika Networks, este dispositivo es altamente seguro y personalizable.

- CONECTIVIDAD:
4G / LTE (Cat 4), 3G, 2G

- WAN FAILOVER:
Cambio automático para las conexiones backup disponibles

- WI-FI:
Punto de acceso inalámbrico con funcionalidad hotspot

- DOBLE SIM:
Con failover automático, backup WAN y otros escenarios de conmutación

- ETHERNET:
4x interfaces de Ethernet con funcionalidad de VLAN

- RMS:
Compatible con el sistema de gestión remota Teltonika

---

MOBILE
- Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
- SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network
- Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL
- Black/White list: Operator black/white list
- Band management: Band lock, Used band status display
- APN: Auto APN
- Bridge: Direct connection (bridge) between mobile ISP and device on LAN
- Passthrough: Router assigns its mobile WAN IP address to another device on LAN
- Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services (not available in standard FW)

WIRELESS
- Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
- Wi-Fi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP
- SSID: SSID stealth mode and access control based on MAC address
- WiFi users: Up to 100 simultaneous connections
- Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET
- WAN: 1x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards
- LAN: 3x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

SYSTEM CHARACTERISTICS
- CPU: Atheros Wasp, MIPS 74Kc, 550 MHz
- RAM: 128 MB, DDR2
- FLASH storage: 16 MB, SPI Flash

INPUT/OUTPUT
- Input: 1x Digital input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
- Output: 1x Digital open collector output, max output 30 V, 300 mA
- Events: SMS, EMAIL, RMS

POWER
- Connector: 4 pin industrial DC power socket
- Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31VDC 10us max
- PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
- Power consumption: < 2 W idle, < 7 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
- Ethernet: 4x RJ45 ports, 10/100 Mbps
- I/O’s: 1x Digital Input, 1x Digital Output on 4 pin power connector (available from HW revision 1600)
- Status LEDs: 1x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
- SIM: 2x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
- Power: 1x 4 pin power connector
- Antennas: 2x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors